800#
21:34:25: BR0:1 PPP: Treating connection as a callout
21:34:26: BR0:1 PPP: Phase is AUTHENTICATING, by both
21:34:26: BR0:1 CHAP: O CHALLENGE id 31 len 24 from "800"
21:34:26: BR0:1 CHAP: I CHALLENGE id 31 len 29 from "Router_B"
21:34:26: BR0:1 CHAP: O RESPONSE id 31 len 24 from "800"
21:34:26: BR0:1 CHAP: I SUCCESS id 31 len 4
21:34:26: BR0:1 CHAP: I RESPONSE id 31 len 29 from "Router_B"
21:34:26: BR0:1 CHAP: O SUCCESS id 31 len 4
21:34:27: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:1, changed state
to up
800#ping 10.0.0.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.0.0.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 36/36/36 ms
800#sh isdn stat
Global ISDN Switchtype = basic-ni
ISDN BRI0 interface
dsl 0, interface ISDN Switchtype = basic-ni
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 85, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
TEI = 86, Ces = 2, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
Spid Status:
TEI 85, ces = 1, state = 8(established)
spid1 configured, no LDN, spid1 sent, spid1 valid
Endpoint ID Info: epsf = 0, usid = 2, tid = 1
TEI 86, ces = 2, state = 8(established)
spid2 configured, no LDN, spid2 sent, spid2 valid
Endpoint ID Info: epsf = 0, usid = 4, tid = 1
Layer 3 Status:
1 Active Layer 3 Call(s)
Activated dsl 0 CCBs = 1
CCB:callid=0x801C, sapi=0x0, ces=0x1, B-chan=1 calltype = DATA
Total Allocated ISDN CCBs = 1
Router_B
Router_B#sh run
Building configuration...
Current configuration: