CCIE实验室考试指南(7)
Lab 07-
ISDN LAB
Configure ISDN on Routers 800 and Router_B with bi-directional
calling
Use CHAP authentication
Allow all IP traffic that is non-broadcast
此主题相关图片如下：
Router 800
800#sh run
Building configuration...
Current configuration:
!
version 12.0
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname 800
!
username Router_B password 0 ccieprep
username 800 password 0 ccieprep
!
ip subnet-zero
!
isdn switch-type basic-ni
!
interface Ethernet0
no ip address
no ip directed-broadcast
shutdown
!
interface BRI0
ip address 10.0.0.1 255.255.255.0
no ip directed-broadcast
encapsulation ppp
dialer map ip 10.0.0.2 name Router_B 8358661
dialer-group 1
isdn spid1 0835866201
isdn spid2 0835866401
ppp authentication chap
hold-queue 75 in
!
router rip
network 10.0.0.0
!
ip classless
!
dialer-list 1 protocol ip permit
!
line con 0
transport input none
stopbits 1
line vty 0 4
!
end
Verification of Configuration:
800#ping 10.0.0.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.0.0.2, timeout is 2 seconds:
21:34:25: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up.!!!!
Success rate is 80 percent (4/5), round-trip min/avg/max = 32/40/56 ms
|
您将承担一切因您的行为、言论而直接或间接导致的民事或刑事法律责任
留言板管理人员有权保留或删除其管辖留言中的任意内容 本站提醒：不要进行人身攻击。谢谢配合。 |