%LINEPROTO-5-UPDOWN: Line protocol on
Interface Ethernet1,
changed state to down
%LINEPROTO-5-UPDOWN: Line protocol on
Interface Serial0,
changed state to down
%LINEPROTO-5-UPDOWN: Line protocol on
Interface Serial1,
changed state to down
%SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-J-L),
Version 11.2(3),
RELEASE SOFTWARE (fc2)
Copyright (c) 1986-1996 by cisco Systems, Inc.
Compiled Mon 30-Dec-96 21:28 by ajchopra
%LINK-5-CHANGED: Interface Ethernet0,
changed state to administratively down
%LINK-5-CHANGED: Interface Ethernet1,
changed state to administratively down
%LINK-5-CHANGED: Interface Serial0,
changed state to administratively down
%LINK-5-CHANGED: Interface Serial1,
changed state to administratively down
Router>en
Router#copy start run
atlanta#
atlanta#config t
Enter configuration commands, one per line.
End with CNTL/Z.
atlanta(config)#enable secret password
atlanta(config)#config-reg 0x2102
atlanta(config)#int e0
atlanta(config-if)#no shut
atlanta(config)#int e1
atlanta(config-if)#no shut
atlanta(config-if)#int s0
atlanta(config-if)#no shut
atlanta(config)#int s1
atlanta(config-if)#no shut
atlanta(config-if)#
atlanta#
%SYS-5-CONFIG_I: Configured from console
by console
atlanta#copy run start